Thermal Insulation
- Professional thermal insulation services
- Cuts heat loss and stops condensation
- Commercial and industrial sites
- Experienced insulation teams
You’re in good company. We’ve worked with the following commercial clients… View all
Thermal Insulation Installation
We are your trusted partner for high-quality thermal insulation services across the UK.
Based in the South East of England, we’re on hand around the clock nationwide.
At ICE Thermal, we understand the critical role that thermal insulation plays in maintaining energy efficiency, preventing heat loss, preventing freezing pipes, fire protection, and reducing noise levels.
Our comprehensive thermal insulation solutions cater to both domestic and commercial needs, ensuring a safer, more energy-efficient environment.
Simply give us a call today at 02033764802 to find out more about our full range of thermal installation services. Alternatively, you can email us at enquiries@icethermal.co.uk to find out what other services we offer.
Our thermal insulation treatment process
Step 1 Contact
To book a free, no-obligation site survey, call us on 02033764802 or email us at enquiries@icethermal.co.uk.
A member of our friendly support team will get back to you to talk through what you need. To help us plan, it's useful to know:
- What needs insulating, such as pipework, ductwork, tanks, valves or plant
- Which systems it's on, such as heating, hot water, chilled water, steam or process
- Whether it's a new build, a refit or an existing building
- Roughly how much there is and where it runs
- Any problems you've noticed, such as dripping pipes, a hot plant room or high energy bills
- Any deadlines, project programmes or specifications we need to work to
Photos and drawings are helpful if you have them, but they're not essential. Where we can, we'll give you an early idea of cost over the phone or by email. We'll then book a site survey at a time that suits you.
Step 2 Quote
One of our engineers will visit your site to carry out a full survey, following all health and safety rules. They'll walk every plant room, riser, ceiling void and service route in scope. Along the way, they'll measure pipes, ducts and vessels, count bends, valves, flanges and supports, and record the operating temperature of each system.
If there's insulation already in place, we'll check it for gaps, damage and wet or crushed sections. We'll also look for bare valves and fittings, failed vapour barriers on cold pipes, and any signs of corrosion. If we find anything that might contain asbestos, we won't disturb it. Instead, we'll flag it so you can arrange a specialist survey.
We'll carry out a risk assessment at the same time, so nothing unexpected comes up once work starts. This covers access, working at height, hot surfaces, confined spaces, other trades on site and any site rules or permits.
Our team will then recommend the best approach for your site and answer any questions you have. You'll receive a free, detailed quote showing:
- The insulation material and thickness for each system, in line with BS 5422 or your project specification
- The finish for each area, such as foil, PVC, glass cloth or metal cladding
- Every item included, and anything left out and why
- Any removable covers for valves and inspection points
- Options to phase the work around your budget or programme
- A likely timeframe for the job
There's no obligation to go ahead, and the quote is yours to keep.
Step 3 The works
Before we start, we'll send you our risk assessments and method statements (RAMS). We'll agree working areas, start times, access and any permits with you, so everyone on site knows what to expect.
Our fully trained engineers will arrive on time, in uniform and with ID badges, ready to begin. They'll insulate each pipe, duct, tank and fitting in the agreed areas, working to the survey and quote. Insulation is cut and fitted closely around bends, tees, supports and flanges, so there are no gaps for heat to escape. On chilled and cold systems, every joint is sealed to keep the vapour barrier whole, and insulated supports are fitted to stop cold spots at the hangers. Where valves and inspection points need regular access, we fit removable covers or jackets. Each area is then finished in the agreed foil, PVC, glass cloth or metal cladding.
In most cases, your systems can keep running while we work. If any part of the job needs a shutdown, we'll plan it with you well in advance. We'll keep a safe, tidy working area for everyone on site at all times. We can also work early, late or at weekends to keep disruption to a minimum.
When the work is finished, our team will walk the job with you and check that you're happy with every area. We'll leave your site safe, clean and tidy, with all offcuts and waste removed and disposed of properly.
Step 4 After care
Here at ICE Thermal, we go the extra mile to make sure every client is happy.
When the job is complete, you'll receive a handover pack that includes:
- A list of the materials used
- Product data sheets
- The insulation thickness fitted to each system
- Photos of the finished work
Keep this pack with your building records, as it's useful for audits, insurers, energy reporting and any future work on site.
Our dedicated customer service team will be in touch after the job to make sure all your expectations have been met. If anything isn't right, we'll come back and put it right. We can also help with what comes next, such as pipe labelling, valve jackets or a condition and heat loss survey of other areas of your site.
You'll also be given the opportunity to leave a Trustpilot review, so other customers can hear about your experience.
Our helpline is open 9:00 -17:30 Monday-Friday
When calling please have
the following ready:
- Your Name
- Company Name (if applicable)
- Site Postcode
- The problem you're having
- Email Address
Get a Quote
FAQs
The basics
What can ICE Thermal insulate?
We insulate pipework, ductwork, tanks, vessels, calorifiers, valves and flanges, on heating, hot water, chilled water, steam and process systems.
What is thermal insulation for building services?
It's insulation fitted to pipes, ducts, tanks and plant to control heat loss or heat gain. It saves energy, stops condensation and keeps hot surfaces safe to touch.
Materials and methods
How is thermal insulation protected once it's fitted?
We finish it with a covering such as foil, PVC, glass cloth or metal cladding. The covering keeps the insulation dry and protects it from knocks.
Which thermal insulation materials do you use?
Mostly mineral wool, phenolic foam, nitrile rubber and PIR. Each suits different temperatures and spaces, so we choose the material for each service after the survey.
Standards and compliance
Does thermal insulation need to meet fire safety rules?
Yes, in many areas. Insulation and finishes have fire classifications, and some places, such as escape routes and high-rise buildings, need products with a higher rating. We check this before we fit anything.
Which British Standard covers insulation for pipes and ducts?
BS 5422 is the main UK standard. It sets thicknesses for pipework, ductwork and vessels, based on size, temperature and what the insulation needs to do.
Estimates and charges
Can a large insulation project be done in phases?
Yes. We can split the work into phases, such as one plant room at a time, to suit your budget and keep disruption low.
How do you price a thermal insulation project?
We survey every item in scope, then price by the materials, thicknesses, finishes and time needed. You get one clear quote that shows what's included.
On the job
Can you work alongside other trades on a new build?
Yes. We plan our work around the M&E programme and work closely with pipework, ductwork and ceiling trades so the job keeps moving.
Why choose us?
- Cater to domestic, commercial, and industrial facilities
- Nationwide coverage
- A site survey can be provided prior to quotation
- A bespoke service designed to suit all your needs
- All operatives hold professional health and safety qualifications
We’re fully accredited
We take health and safety, our professional expertise and legal obligations very seriously. You can view a list of our accreditations below, or visit our Health & Safety page for more information.
We work with your existing piping system, adhering to BS5422 industry standards throughout the process
At ICE Thermal, we pride ourselves on providing high-quality thermal insulation materials. Our range includes:
- Mineral Wool: A versatile and effective choice for insulation.
- Phenolic Foam: Known for its outstanding thermal performance and fire resistance.
- Armaflex Class O: A reliable, flexible insulation material.
- Fibreglass: An excellent option for thermal and acoustic insulation.
We offer various services under our thermal insulation line, and if you cannot see your desired service here, you can contact us today and enquire further. With thermal insulation installation, we also offer:
- Domestic and mechanical pipework
- Ensure your home or business stays warm and energy-efficient with our expert thermal insulation installation for domestic and mechanical pipework.
- Air duct and ventilation
- Maintain optimal air quality and temperature control by choosing ICE Thermal for air duct and ventilation insulation services.
- Vessels and tanks
- Protect your assets with our thermal insulation solutions for vessels and tanks, preventing energy loss and ensuring safety.
- Valve insulation jacket systems
- Enhance system efficiency and safety with our valve insulation jacket systems, tailored to your specific requirements.
- Service Identification & Pipe Marking
- Comply with industry standards and regulations by availing our services for service identification and pipe marking.
At ICE Thermal, our thermal insulation installation process is designed to ensure precision, efficiency, and optimal performance. Before we begin work, our operatives will conduct a risk assessment and a site survey.
Our experts conduct a thorough assessment of the space or system requiring thermal insulation. This involves evaluating the structure, identifying potential areas of heat loss, and determining the specific insulation requirements.
This allows us to identify any risks before we begin work and make accurate measurements, ensuring the final product is safe and functional. Our staff will communicate with you throughout the process and can answer any questions you may have about the installation.
We guarantee an excellent level of service and outstanding results every time with our 6-step process
At ICE Thermal, our thermal insulation installation process reflects our dedication to delivering superior quality and performance. You can rely on our team for your insulation needs, and see the difference that professional expertise can make.
1. Material selection
Based on the assessment, our team selects the most suitable thermal insulation material for the application. Our choice is guided by the unique needs of the project.
2. Surface preparation
Proper surface preparation is crucial for the effectiveness of thermal insulation. Our team ensures that surfaces are clean, dry, and free from any contaminants that may compromise the performance of the insulation material.
3. Cutting and fitting
The insulation material is precisely cut and fitted to the specific dimensions of the surfaces, pipes, ducts, or equipment being insulated.
4. Sealing and fastening
To prevent heat leakage, our installers seal joints, and seams, ensuring airtight insulation. Fastening is employed to secure the insulation material in place, maintaining its integrity over time.
5. Quality checks
Once the installation is complete, our quality assurance team conducts thorough checks to ensure that every aspect of the insulation meets our high standards. This includes assessments of material integrity, proper fitting, and adherence to safety standards.
6. Documentation and compliance
ICE Thermal is committed to transparency and compliance. We provide comprehensive documentation of the installation process.
Why choose ICE Thermal?
- Our experienced thermal insulation installers are well-versed in the latest industry standards and techniques
- We offer a range of materials and services to address diverse insulation needs
- Serving Kent, London, and surrounding areas, we are your go-to thermal insulation company near you
- ICE Thermal is committed to delivering high-quality thermal insulation services, ensuring the longevity and efficiency of your insulation systems
Choose ICE Thermal for reliable thermal insulation solutions. Contact us today at 02033764802 or enquiries@icethermal.co.uk for a consultation and experience the difference that professional thermal insulation services can make.
We operate nationwide, serving major UK areas including:
- London
- Essex
- Kent
- Hertfordshire